中国产一级古装毛卡片

Location: home »Roller Fine Crusher

Roller Fine Crusher

Working Principle:
Adjustment of discharging-material size: The wedge-shaped or gasket control is installed between two roll wheels. There is adjusting bolt in the top of the control. The wedge makes the active roll wheel away from fixable wheel, while the adjusting bolt is pulling up the wedge, this make the gap in the two roll wheels and discharging-materials size larger. When the wedge is pulled down, the active roll wheel under the action of holddown spring makes the gap and discharging become smaller. The gasket control trough regulates the quantity or thickness of the gasket to adjust the size of discharging-materials.

Main Use:
This roller fine crusher can be widely used in cement, metallurgy, chemical, electric power and coal industries for processing the brittle and tenacious materials. In brick making production line, this machine is mainly used for secondary crushing, which can make the particle size of clay, coal ash or shale, etc less more than 3 mm.

Technical Feature:
The major components of this grinding roller are roll wheels, supporting bearings of roll wheels, hold-down, adjusting and driving device and so on. With low operating cost, this machine is easy to operate and maintain, and change the particle size of discharging materials stably.

Technical Parameter: 
Specification
Capacity
Motor Power
GS600×500
10-20 m³/h
Y4-11KW     Y4-15KW
GS800×500
15-30 m³/h
Y4-15KW    Y4-18.5KW
GS1000×800
25-40 m³/h
Y4-22KW    Y4-18.5KW


 


      

 

Tel: +86-371-64386818 
Email: info@cnwdmachine.com  
Helpful Links:
Brick Machine | Double-Shaft Mixer
   


 

    Your Contact Details To Us    
(*)Required information

CopyRight@ 2012

WANGDA MACHINE FACTORY| All Rights Reserved
 
中国产一级古装毛卡片