中国产一级古装毛卡片

Location: home »Brick Making Machine JZK45

Brick Machine JZK45/45-3.5

Main Usage:
The brick machine JZK45/45-3.5 applies to clay, shale, coal gangue, fly ash, slag, mountain mud, silt, etc. as raw materials to carry out a strong mixing, vacuum processing, and then the screw auger extrusion system to produce provisions cross-section of ordinary solid bricks, hollow bricks, and other products.

 
Technical Features:
The trowel of this machine uses wear-resistant metalization technology; mixer shaft in above stage, main shaft of trowel and the body of machine are worked over by the aging, quenching and tempering; gears of reducer are hard tooth surfaces; clutch adopts screw press patented technology, which improves the service life of our equipments. At the same time, with reasonable design, compact structure, this machine can operate stably without having to install anchor bolt and greatly reduce  the power consumption in the operating process due to shave. Utilizing the equipment and technologies can make the waste profitable as well as saving energy with obvious economic and social benefits.

 
Type
Measuring Unit
JZK40
JZK45
JZK50
JZK60
JZK70
Production Capacity
Pcs/h
8000-10000
10000-13000
12000-16000
16000-18000
18000-22000
Moisture Content in Formation
Percentage
18-22
18-20
18-22
14-18
14-18
Reamer Diameter
mm
400
450-450
500-500
600-600
700
Spindle Speed
r/min
45-50
36-40
28-34
23-25
23-25
Motor Power
Kw
Y280S-4-90Kw
or 110Kw
Upper: Y225-4-45Kw
Upper: Y250M-4-55Kw
Upper: Y250M-4-75Kw
Upper: 90Kw
Lower : Y280S-4-110KW
Lower: Y325S-6-132Kw
Lower: Y315S-6-180Kw
Lower: 250Kw






 

 

 



 
 
Quick Links: Brick Machine JZK70/60—4.0

 
    Your Contact Details To Us    
(*)Required information

CopyRight@ 2012

WANGDA MACHINE FACTORY| All Rights Reserved
 
中国产一级古装毛卡片